Saltar directamente a la navegación principal Saltar directamente al contenido Saltar a la subnavegación

Monitoreo del posicionamiento y de las dimensiones de los componentes

En la fabricación aditiva es necesario controlar diversos parámetros. Los sensores de Micro-Epsilon actúan precisamente en las áreas en las que se requiere máxima calidad de producción, controlando el posicionamiento, la aplicación de polvo y las dimensiones de los componentes. Las versiones empleadas incluyen desde sensores y escáneres láser y sensores de desplazamiento inductivos basados en corrientes de Foucault, hasta sensores de desplazamiento capacitivos.

3D scan prior to laser cladding / laser deposition welding

Laser scanners from Micro-Epsilon are used to detect the contour during laser cladding. These scanners detect the exact contour of the object before the weld is deposited. The 3D data is used to exactly determine the guidance of the weld head. …

Más información

Deposition control of coatings

In coating processes based on laser cladding or laser deposition welding, laser scanners from Micro-Epsilon monitor the coating. Their high profile resolution enables reliable monitoring of the weld deposition. …

Más información
Monitoreo de la capa de revestimiento en soldadura de recargue por láser

CAD comparison of the printed component

In order to monitor their production quality, printed components are inspected using Blue Laser scanners. The components are moved past the scanners with a traversing unit. A 3D image is produced from the laser profiles and then compared with the…

Más información
Inspección de componentes impresos con sensores láser azules

Print head positioning and focal point control

With printing processes, the exact height of the print head is a crucial factor for the quality of the final product. High-speed distance measurement against different material surfaces and reliable edge detection enable a fast readjustment…

Más información
Posicionamiento de la altura del cabezal de impresión y regulación del enfoque

High-resolution fine positioning when printing PCBs

With printing, soldering and assembling processes of printed circuit boards, the exact height positioning of the print head is crucial for a flawless process. optoNCDT laser sensors enable precise positioning of the print head. Regardless of…

Más información
Posicionamiento fino de alta resolución en la impresión de circuitos impresos

Glue bead measurement in dispensing systems

After the reflow soldering process, glue is applied on some points to protect the circuit. The glue bead thickness is a critical factor that is reliably inspected using laser sensors.

Más información
Inspección y medición del cordón de adhesivo en sistemas dosificadores

Orientation and positioning of the building platform

With selective laser sintering, the building platform is lowered after each melting cycle by a defined value which corresponds to the required Z resolution. Inductive displacement sensors based on eddy currents monitor this building platform in…

Más información
Monitoreo, alineación y posicionamiento de plataforma de construcción

Robot path calculation in repair welding processes

In order to calculate the robot path, scanCONTROL laser scanners determine the areas that need to be welded. Providing a high profile resolution and profile frequency, these laser scanners enable quick repairs. …

Más información
Cálculo de la trayectoria del robot en soldadura de reparación

Monitoring the tilted squeegee

Capacitive displacement sensors monitor the position of the squeegee. Two synchronized sensors measure with high resolution both ends of the squeegee to provide exact statements about its tilt angle. This is to ensure that the powder bed has been…

Más información
Monitoreo de la alineación de la rasqueta