Metrología y tecnología de inspección

Vibrating targets pose a particular challenge in optical measurement technology: Due to the constant movement, the position of the target changes during detection, which can cause unclear or incorrect results. The laser can be blurred by the…

The generation of 3D point clouds in coordinate measuring machines (CMM) is used both for quality inspection and for reverse engineering. Laser profile scanners from the scanCONTROL series detect the geometric shape of objects by moving them…

In the food industry, color sensors are indispensable tools for controlling the quality of a wide range of products. These sensors contribute significantly to meeting the high standards in food production. For example, the degree of roasting of…

When extruding solid to viscous masses, the materials must not be allowed to heat up too much. This would lead to burning and therefore undesirable coloration. The precise colorSENSOR CFO sensors measure the color of the materials directly in the…

Laser sensors from the optoNCDT 1900 series are used to 100% inspect the radial and lateral runout of tires for cars and aircraft before they are fitted. Two sensors measure perpendicular to the tires to be tested. The sensor connection is made…

optoNCDT 1220 laser triangulation sensors from Micro-Epsilon are used for the geometrical measurement of components in test equipment. Among other things, they monitor component tolerances of series-produced plastic and aluminum die-cast parts…

For the geological analysis of drill core and mineral samples Cox Analytical Systems offers special X-ray analysis equipment (XRF scanners). These allow sample analysis for almost all elements of the periodic table in one measurement run.…

The Vertical Gauging Unit (VGU) is a measuring system for the precise and non-contact measurement of shafts and axes. The system is equipped with four optical micrometers and a laser distance sensor. The system enables measurements of axial…

The new optoCONTROL CLS1000 optoelectronic fiber optic sensors reliably check the quality of rough, matt or glossy surfaces, for example, during surface grinding. This inspection of metallic workpieces brings significant advantages, as the…

The production of roof tiles places high demands on measurement and testing methods for ensuring constant high product quality. In the DASTOKON semi-automatic measurement and test system and in the BSPK pilot plant a laser triangulation sensor of…

Coordinate measurement machines are used for measuring many different components. Different scanners and measuring equipment measure the surface of the component in three dimensions. Laser line scanners are ideally suited for this purpose. They…

Coordinate measurement machines from Zeiss have been known for decades for the highest quality, precision and reliability. Also the mobile measurement machine, ScanMax fulfills these criteria, in part due to the application of inductive…

In order to measure a wide variety of components, coordinate measuring machines are used. Different gauges and measuring devices provide a 3D image of the surface component. scanCONTROL laser line scanners are ideally suitable for this purpose.…

Foam cutting machines use band knives whose cutting blades typically wear out over the course of their use. In order to ensure high efficiency in the cutting process, the knife sharpness test is carried out during operation. A Micro-Epsilon laser…

Fraunhofer EMI researches the effect of laser beams on different surfaces. For this purpose, various samples are irradiated with a high-power laser that packs a punch of several kilowatts. Meanwhile, two scanCONTROL laser profile scanners from…